Question: Can A 10 Inch Miter Saw Cut A 4×4?

Should I buy a miter saw?

Miter saws are a valuable tool for the DIYer, and a must-have tool for a fully functioning workshop.

They are designed to quickly cut crown molding, door frames, window casings, and picture frames.

Miter saws can also make straight cuts for general do-it-yourself woodworking projects..

Can a 10 inch sliding miter saw cut a 4×4?

While a 10 inch blade on a miter saw can cut through a 4×4 in one or two steps, this may not be enough from a practical standpoint. If you want to get the job done faster and smoother you should definitely consider either a 12 inch miter saw of any type or a 10 inch sliding miter saw.

Can I put a cut off wheel on a miter saw?

As long as the RPM of your miter saw is within the appropriate range of the cutoff wheel, I see no reason not to.

What is the advantage of having a sliding miter saw?

Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.

Are Craftsman miter saws any good?

The saw has a clear plastic blade guard that offers good visibility and operates smoothly. The right fence is fixed while the left fence does expand for larger capacity and also to allow for left bevel cuts (this saw only bevels left). Overall I found this saw comfortable to use and also easy to adjust.

Can a 7 1 4 miter saw cut a 4×4?

Most circular saws sport a 7 ¼” blade which has a cutting depth of up to just over 2 ½” at 90 degrees and usually less when cutting bezels. The smaller 6 ½” blade cuts to a max depth of 2 1/8″. This means that the two most common blades are not large enough to go through a 4×4 in a single pass.

Should I get a 10 or 12 miter saw?

The main differences between 10 inch vs 12-inch miter saw are: 10 inch spins faster, whereas the 12 inch miter saw is slower due to its heavy blade. 10 inch is cheaper due to its clear cut option, whereas 12 inch miter saw is more expensive because the blades have teeth and that increases the value of a saw.

Will a 10 inch miter saw cut a 6×6?

Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. … The sliding action can cut even wider boards.

What can a 7 1 4 miter saw cut?

Kobalt 7 1/4 Sliding Compound Miter Saw It is ideal for framing and molding cuts with a maximum crosscut of up to 2-inch x 8-inch. 45° left bevel and 45° left and right miters will add versatility to your cutting. With positive miter and bevel stops, you can make accurate placement of most used angles.

What size wood can a 10 inch miter saw cut?

A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.

How deep will a 10 inch table saw cut?

3.5-inchesCutting Depth and Blade Size The blade is adjustable, so you can make a shallow cut just a fraction of an inch deep, as well as deeper cuts. With a 10-inch table saw, you can make a maximum cut up to 3.5-inches deep, and with a 12-inch table saw, you can cut up to 4-inches deep.

Can a 12 inch miter saw cut a 6×6?

The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.

Can I use a 7 inch blade on a 10 inch miter saw?

Though not generally recommended, you can use a smaller blade than your saw is designed to handle (with the obvious loss in depth of cut). Never try to use a larger blade. … The most common miter saw sizes are 8, 10 and 12 inches. Keep in mind that larger diameter blades can make longer cuts.

Can I use a metal cutting disc on a miter saw?

Yes, you can use a miter saw to cut metal as long as you use the appropriate blade; however, the types of metals are limited. The most possible metals that you can cut using a miter saw are aluminum and steel. Basically, you can use carbide blades to cut aluminum.

Can you use a metal cut off wheel on wood?

Can I Use a Metal Cutting Disc on Wood? The short and stupid answer is, yes. But, it’s not ideal and most pros would very much advise against using a metal cutting disc to cut wood. … Because using an abrasive blade on a grinder to cut a combustible material like wood, could likely result in tragedy.

How wide can a 7 1 4 miter saw cut?

The RYOBI 7-1/4 in. Sliding Miter Saw is a new edition to the miter family. It can make angled cuts up to 45° on boards all the way up to 6 in. wide, and has a max RPM of 5,350.

Do I really need a sliding miter saw?

A sliding miter saw is perfect for longer pieces of wood you’d be working with, thanks to the blade that can travel in a sliding motion. Not only longer pieces of wood are perfect for cutting with a sliding miter saw, but also thicker pieces of lumber you may be using.

What is the best sliding miter saw for the money?

Best for Pros. DEWALT FLEXVOLT Double Bevel Sliding Miter Saw. … Best Overall. DEWALT Miter Saw. … Best Value. Metabo HPT 12″ Sliding Compound Miter Saw. … Best for Beginners. Metabo HPT 10″ Compound Miter Saw. … Best for Pros. DEWALT FLEXVOLT Double Bevel Sliding Miter Saw. … Best Overall. DEWALT Miter Saw. … Best Value. … Best for Beginners.More items…

What is the difference between a miter saw and a sliding miter saw?

The main difference between a sliding compound miter saw and a compound miter saw is the rail or rails on the sliding saw. These rails allow you to slide the saw back and forward as you cut. The saw can do everything that a compound miter saw can do. … This saw allows you to cut materials that are up to 16 inches thick.

Is Harbor Freight miter saw any good?

Harbor Freight miter saw stands offer durability and portability, making them high quality and easy to use. Their Hercules stand matches the Hercules miter saw but also boasts universal brackets for compatibility with most major miter saw brands.